Skip to content
Kerstens Kamine

Guides

Does my stove need a filter?

Since the end of 2024, filters have been talked about everywhere. Our explainer film (in German) shows what a filter and a catalytic converter actually do, what the law requires for wood-burning stoves today and what we recommend – with chapters to jump to directly.

Explainer film "Does my stove need a filter?" (6:59 min, in German): why everyone has been talking about filters since the end of 2024, what a modern stove achieves by itself, the catalytic converter as an afterburner, what electrostatic filters can do and require, what the law provides for wood-burning stoves, masonry heaters and built-in inserts, and our recommendation. Music: Clean Soul – Kevin MacLeod (incompetech.com), licence CC BY 4.0.

Watch the film on YouTube

Filters and catalytic converters are among the questions we hear most often in our showroom. Our explainer film shows what each of them actually does, what the law requires today and what we recommend.

The film is in German with German subtitles. Below you will find the most important points in English.

Why everyone is talking about filters

At the end of 2024 the last deadline for older wood-burning stoves expired. It applied to stoves built between 1995 and March 2010 according to their type plate. Such a stove may only continue to operate if it meets the limits for dust and carbon monoxide. Otherwise there is nothing to retrofit: it has to be taken out of operation, even if the chimney sweep only comes at the next inspection.

Since then, filters have been talked about everywhere. What often gets mixed up is that a filter and a catalytic converter are two completely different things.

What a modern stove achieves by itself

How much dust and gas leaves the chimney is decided first of all in the firebox. A modern stove therefore feeds air to the fire in stages: from below into the bed of embers, along the glass at the top and once more above the flames, so that the gases from the wood also burn. In addition, the firebox is lined so that it heats up quickly and stays hot.

  • Dust: Since 2015, new wood-burning stoves may emit at most 40 milligrams of dust per cubic metre of flue gas. For old stoves the limit is 150 milligrams, almost four times as much.
  • Efficiency: New wood-burning stoves must reach at least 73 per cent. According to the manufacturers, the wood-burning stoves in our range are mostly around 80 per cent.

Most of the stoves we sell meet the limits without any filter or catalytic converter.

The catalytic converter: an afterburner

A catalytic converter sits above the fire or in the flue path and converts part of the gases that have not burned in the fire, above all carbon monoxide. The more completely the stove itself burns, the less is left for the catalytic converter to do. Some manufacturers fit it as standard on individual models, others offer it as an accessory.

The difference matters: a catalytic converter converts gases, a filter captures dust. One does not replace the other.

Filters: what they can do and what they require

Filters for wood-burning stoves today mostly work electrostatically. An electrode under high voltage charges the dust particles in the flue gas, and they settle on the wall of the flue pipe or chimney. This works well as long as everything is clean.

  • Cleaning: What the filter captures stays there, and you cannot see this deposit before lighting the fire. The approval of such a filter therefore requires it to be checked and cleaned at least once a year, and with heavy use even four times a year.
  • Power: The filter needs a power connection and must be running while you heat.
  • Dust only: A filter does not hold back carbon monoxide.
  • Costs: An electrostatic filter alone costs around 2,500 to 3,600 euros depending on the version, according to a current manufacturer's price list; with installation and power connection you will usually be above 3,000 euros.

What the law requires

  • New wood-burning stoves, fireplace inserts and cassettes: The German Federal Immission Control Ordinance does not require a filter today. The appliances must meet their limits beforehand in a type test on the test bench.
  • Masonry heaters: The ordinance only requires a filter for masonry heaters that a stove builder sets entirely from stone on site, and even there only if no measurement shows that the values are met without a filter.
  • Old stoves: A filter only helps against dust. If an old stove exceeds the limit for carbon monoxide, even the best filter does not help, and the only option left is replacement.
  • Built-in heating inserts, for example in a tiled stove: here the ordinance provides for a dust filter, which often cannot be installed. Many chimney sweeps say: the filter was only an option until the end of 2024, after that replacement is what counts.

Our recommendation

As long as a filter is not mandatory for your stove, we tend to advise against it. But if it is the best solution in your case, our fitters from 369 Vision Werk will of course install it.

For an old wood-burning stove, a new stove is almost always the better solution. It burns the wood more completely, gets more heat out of it and does not need a filter that costs electricity and maintenance. The chimney sweeps in our region see it the same way: for old wood-burning stoves they usually recommend a new stove rather than a filter.

By the way, you yourself make the biggest difference. Between a well-operated and a very badly operated wood stove, the dust can differ by more than a hundredfold.

  • Dry wood: Only heat with wood below 20 per cent residual moisture. How to store and measure wood is explained in our guide Storing firewood.
  • Light from the top and rather add a few logs more often than many at once.
  • Air open when lighting, so that the fire gets hot quickly. How a stove can regulate this by itself is shown in our film Never heat the wrong way again.

Your next step

Not sure what applies to your stove? Take a photo of the type plate and bring it to our showroom in Ausbüttel or send it to us via the contact form. Then we will look together at which option is worthwhile for you. You can book an appointment directly online.

Limits and deadlines according to the German 1st Federal Immission Control Ordinance (1. BImSchV). Efficiencies according to manufacturers' data, filter prices according to the 2026 price list of a filter manufacturer (recommended retail price). Short answers can be found under Frequently asked questions.

Share this article

WhatsApp Facebook Email

More posts